DAHDI suppor for all B OpenVox cards & A1200P/1800P

do a good job! i suggest you posting the url link to elastix.org and trixbox.org.
it will be good to all of users.
thanks!
James.zhu

B100P in hardhdlc mode as wcbxxp driver
B200P / B400P / B800P
A800P/1200P
Oslec
and lots of minor fixes using 1.4.24 stable release

next week I'll give a try to B100P leds

If you have any suggestion or question please make me know

tips
If you have Dchannel up / down events and it gets locked add resetinterval=never to chan_dahdi.conf in channels section
if you dont want to see Dchan span messages add bri_l1_check=0 ( spelled as bri L one) too

When I finish with all stuff I hope I can give a little help to make it go into Elastix and translate a good install manual for CentOs & Fedora (I'm using Fedora 10 x64 and all compiles & works fine on kernel 2.6.27)

Regards

hello, jose:
OpenVox b100p does not support leds in hardware design, please take a note for that.
regards!
James.zhu

Hi!

Nothing to do left then. Further tests.

Regards

Hi,

any plans for asterisk 1.6.x ?
Actually I am using A400P on 1.6.1, OpenSuSE 11.1 with a "Small Trick" (edit /etc/init.d/asterisk; compile asterisk 1.6.1 and dahdi from source) successfully.
However, the big advantage would be also to use a B100P with 1.6.1/dahdi.
Actually, I use a basic AVM-card for ISDN-connection, on asterisk 1.4.21.1 with OpenSUE 10.3, but not so easy to integrate. Because asterisk 1.6.1 already includes some BRI-support, a B100P should be much better way. Should be a great great sales argument for OpenVox, too
Same valid for all Bx00P-cards, of course.

Hi!
thank's for your great work!

I have installed all your package, and I have a B200P card. Where I can find some info to configure the card with dadhi tools?
Because the tutorial are for mISDN or bristuff

Thank you